Motocross is a relentless game, and the technology and training needed for bike and rider to excel are too. Suzuki poured more than 40 years of open-class racebike engineering into the latest generation RM-Z450.
The result?
A well-balanced engine, chassis and electronics package, plus dramatic styling. And the most potent, best-balanced and competitive RM-Z450 produced yet.
All the power in the world wont do any good if you cant transfer it to the ground, and Suzukis innovative electronics work transparently with the rider for maximum acceleration on any type of dirt or track conditions. Suzukis third-generation traction management system, with a significantly updated S-HAC (Suzuki Holeshot Assist Control) system and more powerful ECM (engine control module).
The RM-Z450s S-HAC system monitors throttle position and gear position in order to adjust ignition timing for maximum acceleration through the three critical stages of a motocross start: releasing the clutch, getting drive over the starting gate, and then powering down the start straight.
Three settings are available: A-mode: Intended for hardpack surfaces where controlling wheelspin is paramount B-mode: For normal dirt conditions with good traction OFF: For normal unassisted take-offs.
"
MX Tuner 2.0
"
Standard with every new MY24 RM-Z purchased, the plug and play MX Tuner 2.0 allows users to alter the engine mapping via the intuitive smartphone WiGET app, available on iOS and Android devices.
The WiGET app comes with several pre-installed factory-developed maps for easy tuning for different riding styles and track conditions.
In just a few minutes the power delivery can be altered for softer delivery settings for hard packed surfaces or dial-in maximum power for deep, loamy conditions and amazing drive out of the corners.
For the more experienced tuner, the possibilities are practically endless with the ability to create fully customised maps with specific settings for 36 points of ignition timing and 36 points of fuel injection delivery.
"
49mm SHOWA Spring Fork & BFRC Shock
"
The RM-Z450 is equipped with the latest SHOWA front and rear suspension components, delivering improved responsiveness and traction, enhanced ability to absorb impacts, better chassis stability, overall feedback to the rider, terrain feel and improved comfort.
Up front, an updated 49mm Showa coil-spring fork based on works A-type design replaces the previous air fork design. Performance has been increased significantly and offers a more consistent feeling throughout a moto. Bike set-up and daily maintenance is also much easier for a wider range of riders.
The Balance Free Rear Cushion (BFRC) rear shock design shares technology with Suzukis flagship GSX-R1000R sportsbike. The design balances pressure above and below the piston to better control the stroke and smooth out reactions to bumps and chop, even under severe braking.
"
Engineering with purpose
"
The 449cm³ liquid-cooled, four-stroke, four-valve, DOHC engine is the latest incarnation of Suzukis proven and reliable fuel-injected powerplant. The engine has high peak horsepower with strong torque at lower engine speeds for excellent throttle response through the entire rev range.
"
Power Everywhere
"
The latest generation RM-Z450 engine has more low-end torque, a flatter overall torque curve, faster and yet more controllable throttle response, and more peak power than the previous version.
"
Refined Cylinder Head
"
Cylinder head port shape was optimsied and the strength of the tumble flow increased by 25%. Improvements to reduce surface roughness within the ports make them smoother, and this contributes to greater engine output.
"
Mikuni Throttle Body With Undermount Injector
The fuel-injector spray path aims fuel upward to hit the throttle butterfly valve directly for improved atomisation.
Optimised Intake Camshaft
"
Features increased lift, improving intake efficiency and increasing power output at all engine speeds.
"
Technical Specifications
Displacement
449cc
Engine
Single cylinder, liquid-cooled, DOHC
Transmission
5-speed, constant mesh
Starter
Primary Kick
Front Suspension
49mm SHOWA inverted spring fork, adjustable compression and rebound damping and spring preload
Rear Suspension
Link type, SHOWA Balance Free Rear Cushion Lite shock with adjustable compression and rebound damping and spring preload
Motocross is a relentless game, and the technology and training needed for bike and rider to excel are too. Suzuki poured more than 40 years of open-class racebike engineering into the latest generation RM-Z450.
The result?
A well-balanced engine, chassis and electronics package, plus dramatic styling. And the most potent, best-balanced and competitive RM-Z450 produced yet.
content_description2
Specifications#####Displacement|449cc;Engine|Single cylinder, liquid-cooled, DOHC;Transmission|5-speed, constant mesh;Starter|Primary Kick;Front Suspension|49mm SHOWA inverted spring fork, adjustable compression and rebound damping and spring preload;Rear Suspension|Link type, SHOWA Balance Free Rear Cushion Lite shock with adjustable compression and rebound damping and spring preload;Front Brakes|Nissin twin-piston caliper, 270mm wave disc;Rear Brakes|Nissin single-piston caliper, 240mm wave disc;Length|2175mm;Width|835mm;Height|1260mm;Wheelbase|1480mm;Seat Height|960mm;Fuel Capacity|6.3L;Wet Weight|112Kg;Tyres - front|80/100-21 51M, tube type;Tyres - rear|110/90-19 62M, tube type;Warranty|N/A
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Team Moto’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Team Moto’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 68 Moss Street, SLACKS CREEK, QLD, 4127, AU. Our ABN is . The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.
Privacy Policy
You consent to the collection, holding, use and disclosure of your personal information in accordance with our Privacy Policy